TM 55-2840-251-23
7-1 GLOW PLUGS (Continued)
7-1-4 TESTING (Cont)
7.
Glow plug shall attain an even overall orange yellow
color within eight seconds.
8.
Place test set switch SW1 to OFF.
CAUTION
Allow glow plugs to cool before handling.
7-1-5 INSTALLATION
1.
Fit gasket to glow plug. Do not lubricate glow plug
thread or internal thread in gas generator case.
2.
Install glow plug and gasket into gas generator case.
3.
Torque glow plug to 300-360 inch-pounds, loosen to
zero and retorque to 300 inch-pounds.
FOLLOW ON MAINTENANCE:
None
END OF TASK
7-4.1/(7-4.2 Blank)
