TM 55-2840-251-23
7-5 THERMOCOUPLE HARNESS (AVIM) (Continued)
7-5-4 REPAIR (Cont)
Terminal Lugs
Replace terminal lugs as follows:
1.
Cut wire close to weld.
2.
Open ears of lug and remove lug.
3.
Work braid back 1-1/2 inches.
4.
Wrap two turns of Tape (E.48) around exposed
insulation.
5.
Trim insulation to 3/16 inch from end of wire.
6.
Return braid and trim to 5/16 inch from end of wire.
7.
Wrap two turns Tape (E.48) around braid.
8.
Install Tubing (E.68) to ¼
inch from end of wire.
9.
Install appropriate material terminal lug.
GO TO NEXT PAGE
7-23
