TM 55-2840-251-23
Section V THERMOCOUPLE HARNESS
7-5 THERMOCOUPLE HARNESS (AVIM)
This task covers:
a.
Removal (7-5-1)
b.
Inspection (7-5-2)
c.
Testing (7-5-3)
d.
Repair (7-5-4)
e.
Installation (7-5-5)
INITIAL SETUP
Applicable Configurations:
Some Engines (also see
Task 7-6)
Tools:
Powerplant Mechanic's Tool Kit
NSN 5180-00-323-4944
Torque Wrench (O to 100 inch-
pounds)
Simpson Tester
Pliers (T.17)
Pliers (T.74)
Materials:
Lockwire (E.4)
Tape (E.48)
Crocus Cloth (E.64)
Cement (E.66)
Filler (E.67)
Tubing (E.68)
Rod (E.69)
Methyl-Ethyl-Ketone (E.75)
Personnel Required:
68B Powerplant Mechanic
68F Aircraft Electrician
Equipment Condition:
Power Section Removed
(Task 4-1-1)
Containment Ring Removed
(Task 4-2-1)
General Safety Instructions:
WARNING
TOXIC AND FLAMMABLE SOLVENTS
Solvents used for cleaning are toxic and
flammable. They irritate skip and cause burns.
Fire can result from use near heat or open
flame,
Use only in a well-ventilated area. Wear
rubber gloves, In case of contact, immediately
flush skin or eyes with water for at least 15
minutes. GET IMMEDIATE MEDICAL
ATTENTION FOR EYES.
GO TO NEXT PAGE
7-19
