TM55-2840-251-23
Section V P3 FILTER ELEMENT
10-5
P3 FILTER ELEMENT
This task covers:
a.
Inspection (10-5-1)
b.
Removal (10-5-2)
c.
Cleaning (10-5-3)
d.
Installation (10-5-4)
INITIAL SETUP
Applicable Configurations:
Some Engines
Tools:
Powerplant Mechanic's Tool Kit
NSN 5180-00-323-4944
Torque Wrench (0 to 100 inch-
pounds)
Materials:
Lockwire (E.5)
Petroleum Solvent (E.8)
Parts:
Packings
Filter Element
Personnel Required:
68B Powerplant Mechanic
References:
TM55-2840-251-23P
General Safety Instructions:
WARNING
TOXIC AND FLAMMABLE SOLVENTS
Solvents used for cleaning are toxic
and flammable. They irritate skin and
cause burns. Fire can result from use
near heat or open flame.
Use only in a well-ventilated area.
Wear rubber gloves. In case of
contact, immediately flush skin or
eyes with water for at least 15 minutes.
GET
IMMEDIATELY
MEDICAL
ATTENTION FOR EYES.
10-5-1
INSPECTION
1.
Inspect air filter for contamination and obvious
defects.
2.
Replace if defective or contamination impossible
to remove.
3.
Insure bleed hole in cover is clear.
GO TO NEXT PAGE
10-35
