TM 55-2840-254-23
2-27 CLEAN STATOR VANE ASSEMBLIES
2-27
INITIAL SETUP
Applicable Configurations:
All
Tools:
Goggles
Compressed Air Source
Fiber Brush
Materials:
Dry Cleaning Solvent (E17)
Gloves (E20)
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipment Condition:
Compressor Housing Removed (Task 2-19
or 2-20)
Stator Vane Assemblies Removed (Task 2-26)
Genera/ Safety Instructions:
Dry cleaning solvent (E17) is flammable
and toxic. It can irritate skin and cause
burns, Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
1.
2.
Wear gloves and immerse stator vane assemblies
(1,2,3,4,5,6, and 7) in dry cleaning solvent
(E17).
Remove contaminants by scrubbing stator vane
assemblies with fiber brush.
GO TO NEXT PAGE
2 - 2 2
8