TM 55-2840-254-23
2-30 INSTALL STATOR VANE ASSEMBLIES (Continued)
2-30
NOTE
Stator vane assembly halves which meet
serviceable limits may be matched with
other serviceable vane assembly halves.
Rematched halves shall meet all assembly
requirements. Rematched halves should
have about the same amount of erosion
or FOD.
NOTE
Procedural for installing upper and lower
compressor housing stator vane assem-
blies are the same. Instructions for instal-
ling Iower compressor housing stator
vanes are given.
1. Install one-half of seventh stage stator vane (1)
into compressor housing half (2) as follows:
a.
b.
Install three washers (3) and three bolts (4) in
bolt locations (5). Finger tighten bolts (4).
Install six washers (6) and six bolts (7) in bolt
locations (8). Finger tighten bolts (7).
GO TO NEXT PAGE
2-235