TM 55-2840-254-23
2-30 INSTALL STATOR VANE ASSEMBLIES (Continued)
2-30
(a)
(b)
(c)
INSPECT
(d)
(e)
(f)
Remove stator vane assemblies.
(Ref. Task 2-26).
File shroud ends (37). Use flat hand
file.
Clean stator vane assemblies.
(Ref. Task 2-27).
Install stator vane assemblies
(steps 1 thru 7).
Repeat steps 8a. thru 8.e.
If non-lead making compound is still
visible, repeat step 8.h., (3), (a) thru
(f).
GO TO NEXT PAGE
Change 5
2-253