TM 55-2840-254-23
2-30.1 INSTALL RTV IN FIRST STAGE STATOR VANE ASSEMBLY (Continued)
2-30.1
(21) Position compressor housing half (3)
facing up and level.
(22) Adjust air pressure regulator to 60 psi.
Inject RTV as follows:
(a)
(b)
Inject RTV through five holes (45)
in stator outer shroud (46) starting
with center hole marked 1 and work
in sequence alternately toward
housing splitline (47).
Inject all five holes (45) until RTV
begins to flow out through the five
1.500 inch slots in forward retainer
(18).
GO TO NEXT PAGE
Change 5
2-254.25
