TM 55-2840-254-23
2-46 ASSEMBLE NO. 2 BEARING PACKAGE (AVIM) (Continued)
2-46
Seal must be dipped in lubricating oil
before installation. Failure to comply
will cause damage to seal during dry
running period of initial engine starts.
NOTE
If part number is not visible, retaining
ring that holds carbon seal elements
should face out.
1. Dip serviceable seal (1) in lubricating oil (E32)
or E33), Press seal (1) in housing (2) with part
number facing down. Use oil seal installation
tool (Appendix E) (3) and arbor press.
2. Install retaining ring (4)
in housing (2).
INSPECT
GO TO NEXT PAGE
2-418
