TM 55-2840-254-23
2-46 ASSEMBLE NO. 2 BEARING PACKAGE (AVIM) (Continued)
2-46
NOTE
In following step, no more than three
shims shall be used. If more than three
shims are needed, replace bearing. If
more than three shims are still needed,
replace housing. If no shim is required,
omit steps 7. and 8.
7. Align holes (16) and install previously deter-
mined shim(s) (6) in housing assembly (7).
8. Dip bearing inner race (17) in lubricating oil
(E32 or E33). Install bearing inner race (17) in
outer race (10) with part number facing down.
GO TO NEXT PAGE
2-422