TM 55-2840-254-23
2-47 INSTALL NO. 2 BEARING PACKAGE (AVIM) (Continued)
2-47
3. Hold handle (5) and turn handle (4) clockwise
until No. 2 bearing package (1) is firmly seated
on compressor shaft (2).
4. Remove installing tool (T26) (3) as follows:
a. Turn handle (4) counterclockwise and loosen
sleeve (7).
b. Turn handle (5) counterclockwise and un-
screw sleeve (6).
c, Remove installing tool (T26) (3).
INSPECT
GO TO NEXT PAGE
2-429
