TM 55284025423
2492 Change 7
263 INSTALL OUTPUT SHAFT SUPPORT HOUSING (Continued)
263
3.
Install two packings (6 and 7) in grooves (8
and 9) on output shaft support housing (5).
NOTE
Be sure that packing (7) is correctly
installed on the aft face of the output
shaft support housing (5) to the
groove (9) above. Improper installa-
tion may interfere with the lubrication
patch in housing (5) and may cause
instances of low engine oil pressure.
4.
Install packing (10) in groove (11) on output
shaft support housing (5).
GO TO NEXT PAGE