TM 55-2840-254-23
4-2 CLEAN THERMOCOUPLE JUMPER LEAD
4-2
INITIAL SETUP
Applicable Con figurations:
All
Tools:
None
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipment Condition:
Off Engine Task
Thermocouple Jumper Lead Removed
(Task 4-1)
Materials:
Dry Cleaning Solvent (E17)
Gloves (E20)
Lint-Free Cloth (E26)
Dry cleaning solvent (E 17) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 15 minutes.
Get medical attention for eyes.
1. Wear gloves (E20) and clean thermocouple jump-
er lead (1). Use lint-free cloth (E26) dampened
in dry cleaning solvent (E17).
FOLLOW-ON MAINTENANCE:
Inspect Thermocouple Jumper Lead (Task 4-3).
END OF TASK
4-11
