TM 55-2840-254-23
4-4 REPAIR THERMOCOUPLE JUMPER LEAD
4-4
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powerplant Mechanic’s Tool Kit,
NSN 5180-00-323-4944
Technical Inspection Tool Kit,
NSN 5180-00-323-5114
Goggles
Compressed Air Source
Materials:
Crocus Cloth (El 5)
Personnel Required:
68B10 Aircraft Powerplant Repairer
68B30 Aircraft Powerplant Inspector
Equipment Condition:
Off Engine Task
NOTE
This repair is allowed provided it does
not cause pins to break or crack.
1. Straighten bent pins (1) of electrical connector
(2). Using long-nose pliers, gently move pins
(1) until they are straight.
2. Remove corrosion from pins (1) of electrical
connector (2). Polish pins, using in and out
motion over entire length of pin until corrosion
is removed. Use crocus cloth (El 5).
GO TO NEXT PAGE
4-14
