TM 55-2840-254-23
4-25 INSTALL THERMOCOUPLE HARNESS ASSEMBLIES (AVIM) (Continued)
4-25
NOTE
Raised sides of gasket indentations go
toward thermocouple probe. Gasket
may have to be turned to align bolt
holes properly as holes are slightly off
center.
7. Position raised indentations (17) toward ther-
mocouple probe. Install two gaskets (18) and
rotate thermocouple harness assembly (7) to
align probes (19) with holes (20).
GO TO NEXT PAGE
4-116
