TM 55-2840-254-23
4-25 INSTALLTHERMOCOUPLE HARNESS ASSEMBLIES (AVIM) (Continued)
4 - 2 5
11.
Measure continuity of thermocouple
harness assembly (7) as follows
a.
Set multimeter range switch to R x 1.
b.
Clip red lead (23) to pin (24)
c.
Clip black lead (25) to pin (27).
d.
Meter shall Indicate 3 ohms maximum
12.
Repeat steps 10, and 11, for four remaining
thermocouple harness assemblies.
13.
Lockwire 5 bolts (21) and 20 bolts (22), ten
bolts (28) and 23 bolts (29) Use lockwire (E28).
INSPECT
GO TO NEXT PAGE
4-120
Change 2
