TM 55-2840-254-23
4-36
INSTALL FOURTH STAGE POWER TURBINE ROTOR (AVIM) (Continued)
4-36
b.
Install halves (9) of holding fixture
(T56) (10) on hub (11) of fourth
stage power turbine rotor (4) just
under splines (12).
c.
Install two pins (8) in holes (13).
d.
Coat splines of third stage power
turbine rotor shaft with Ease Off 990
(E5) before installing fourth stage
power turbine rotor.
4. Install induction heater (T50) (14)
on fourth stage power turbine rotor
(4).
GO TO NEXT PAGE
Change 5 4-167
