TM 55-2840-254-23
4-66 INSTALL FIRST TURBINE DISC ASSEMBLY (AVIM) (Continued)
4-66
11. Check axial clearance between first turbine noz-
zle (2) and first turbine disc assembly (1). Use
bent wire gage (Appendix E) (31) inserted be-
tween first turbine nozzle (2) and first turbine
disc assembly (1). Clearance shall be 0.100 inch
minimum.
12. If clearance is not proper, remove parts and re-
check shim thickness (step 2).
INSPECT
GO TO NEXT PAGE
4-423
