TM 55-2840-254-23
WARNING
4-81
REPAIR EXIT VANE ASSEMBLY
4-81
INITIAL SETUP
Applicable Configurations:
All
Tools:
Technical Inspection Tool Kit,
NSN 5180-00-323-5114
General Support Welding Aircraft
Maintenance Shop Set
NSN 4920-00-621-2043
Portable Electric Drill
Twist Drill, 3/32-Inch
Carbide Burr, Ball Shape,
1/8-Inch Diameter Shank
Goggles
Materials:
Carborundum Stone (E10)
Crocus Cloth (E15)
Fluorescent-Penetrant Materials (E19)
Welding Wire (E61)
Personnel Required:
68B10 Aircraft Powerplant Repairer
68B30 Aircraft Powerplant Inspector
References:
TM 44-0103
TM 55-1500-204-25/1
Task 4-79
Task 4-80
Equipment Condition:
Off Engine Task
General Safety Instructions:
Welding operations are hazardous. Harmful
light rays may injury eyes and burn skin. Poi-
sonous fumes may cause illness. Burns and
fires may result from hot sparks. Wear
protective clothing and equipment. Perform
welding operations in well ventilated areas
away from flammable liquids and gases. If
fire occurs, call for assistance and use proper
extinguishing procedures. lf injury or
illness occurs, get medical attention.
GO TO NEXT PAGE
Change 4 4-501
