TM 55-2840-26623
5-18 DISASSEMBLE OVERSPEED DRIVE AND OUTLET COVER ASSEMBLY (Continued)
6-18
4. Remove cotter pin (8), nut (9), and washer (10)
from gear assembly (6).
5. Remove bearing (7) from gear assembly (6).
Use mechanical puller attachment.
6. Remove shim (11). If shim is a laminated shim,
record measurement and discard. Replace with
solid shim (Ref. Task 5-23.1).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 3
5-103/(5-104 blank)