TM 55-2840-254-23
5-20
INSPECT OVERSPEED DRIVE AND OUTLET COVER ASSEMBLY (Continued)
5-20
2. Inspect strainer (6).
a. There shall be no contamination.
b. There shall be no tears in wire mesh.
3. Inspect cover (7) for cracks. There shall be no
cracks.
4. Inspect bearing (8).
a. There shall be no rust or broken parts,
b. There shall be no pitting.
c. There shall be no red-purple, purple or blue
discoloration.
Lubricating oils (E32 or E33) cause
paralysis if swallowed. Prolonged contact
with them may irritate the skin. Handle
only in well-ventilated areas away from
heat and flame. Drain and store in ap-
proved metal safety containers. Avoid
prolonged or repeated contact with skin
and do not take internally. Wash con-
tacted areas of skin thoroughly after
handling. If irritation of skin results, get
medical attention.
5. Immerse bearing (8) in lubricating oils (E32 or
E33) and wrap in lint-free cloth (E26).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-108