TM 55-2840-254-23
5-19
CLEAN OVERSPEED DRIVE AND OUTLET COVER ASSEMBLY (Continued)
5-19
Protect bearings from damage. Handle
only in clean area. Use clean, lint-free
cloth (E26). Damaged bearings can
cause engine failure.
1. Wear gloves (E20). Clean gear assembly (1),
strainer (2), cover (3), and bearing (4) by im-
mersing in dry cleaning solvent (El 7). Scrub
with a fiber brush.
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than 30
psig air pressure. Do not direct air toward
yourself or another person. Failure to
comply could result in injury to eyes or
skin. In case of injury, get medical
attention.
2. Wear goggles. Blow dry. Use clean, dry com-
pressed air.
FOLLOW-ON MAINTENANCE:
Inspect (Task 5-20).
END OF TASK
5-106
