NAVAIR 01-1A-505-2
003 02
TO 00-25-255-1
Page 88
TM 1-1500-323-24-2
c.
Hold removal tool at a slight angle to wire end
179. MIL-C-29600 CONNECTOR SYSTEM REPAIR.
slide along wire until it surrounds the wire.
180. WIRED CONTACT REMOVAL. The following
d. Hold removal tool perpendicular to grommet
procedure covers the removal of wired contacts for the
face and slide tool into cavity until it stops against the
MIL-C-29600 connector system:
contact shoulder (Figure 48).
a. Remove backshell in accordance with
e.
Hold wire firmly in removal tool and pull wire
WP 003 03.
and tool from grommet maintaining tool and wire
perpendicular to grommet (Figure 49).
b.
Select proper removal tool from Table 31.
Figure 48. Removal Tool Insertion
Figure 49. Contact Removal