TM 1-6625-476-30
3-37
3-12. PNVS NSA REMOVAL FROM NIGHTSIDE TEST BENCH. (CONT)
f. Removal of PNVS Turret from Turret Holding Fixture and Installation in Shipping and Storage
Container.
(1) Open shipping and storage container as follows:
(a) Press pressure relief valve (1, figure 3-27) on container (2).
(b) Open container latches (3).
(c) Remove container lid (4).
(2) Remove PNVS turret assembly from PNVS holding fixture as follows:
(a) Disconnect turret cable connector (1, figure 3-28) from holding fixture connector clamp
(2).
(b) Loosen three captive screws (3) securing turret (4) to holding fixture (5). Jiggle screws to
ensure that they are free from turret.
Figure 3-27. Shipping and Storage Container Lid Removal
