TM 10-4930-351-14
0074 00
PUMP ASSEMBLY-Continued
10
11
12
13
7
8
6
4
5
3
2
1
9
16
17
15
14
9.
Install snap ring (8) that secures shaft seal assembly (7) to armature shaft.
10. Slide rotor (5) on armature shaft over shaft seal assembly (7).
11. Align slots in rotor (5) with slot on armature shaft. Install rotor key (6).
12. Install the five rotor vanes (4), with smooth side of vanes facing direction of rotor (5) rotation (clockwise).
13. Install rotor cover gasket (3) in pump housing (9) groove.
14. Position rotor cover (2) on pump housing (9). Install the four bolts (1) that attach pump rotor cover (2) to pump housing
(9). Do not over tighten the four bolts (1).
END OF WORK PACKAGE
0074 00-3/4 blank
