TM 10-4930-351-14
0083 00
VENTURI ASSEMBLY AND INSTALLATION (Refer to figure 4.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic Automotive
Silicone Compound (WP 0116, Item 12)
(WP 0113 00, Item 1)
Retaining Ring (WP 0117, Item 83)
O-Ring (WP 0117 00, Item 109)
1.
Install three O-rings (9) coated with silicone compound on venturi (18) and install venturi in housing body (2).
2.
Place two housing bodies (2 and 3) together, align holes in bodies, and install four screws (5 and 6) and nuts (4).
Torque nuts to 20 foot-pounds (2.77 m-kg).
3.
Install capscrew (1) into housing body (2).
FEMALE COUPLING HALF CLEANING AND INSPECTION (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
None
Wiping Rag (WP 0116 00, Item 21)
1.
Wash female coupling half (15) with a hot water and commercially available soap solution. Dry with a wiping rag.
2.
Inspect female coupling half (15) to determine if cracked, burred, or leaking.
3.
Inspect female coupling half (15) for damaged or missing dust plug (16), gasket (17), chain (21), or key rings (22).
FEMALE COUPLING HALF REPAIR (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic Automotive
Silicone Compound (WP 0116, Item 12)
(WP 0113 00, Item 1)
Dust Plug (WP 0117, Item 95)
Gasket (WP 0117, Item 96)
1.
Replace Gasket. Remove damaged gasket (17) from female coupling half (15). Apply silicone compound to all surfaces
of new gasket and install in the female coupling half (15).
2.
Replace Dust Plug. Remove damaged dust plug (16) and chain (21) from female coupling half (15) key ring (22). Pry
open key ring (22) and install new dust plug with chain (21) on key ring (22).
3.
Replace Chains (21) and Key Rings (22). Follow steps 5 and 6 in female coupling half (15) replacement procedure.
0083 00-14
