TM 10-4930-351-14
0083 00
MALE COUPLING HALF REPAIR (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic Automotive
Silicone Compound (WP 0116, Item 12)
(WP 0113 00, Item 1)
Dust Cap (WP 0117, Item 94)
Gasket (WP 0117, Item 96)
1.
Replace Gasket. Remove damaged gasket (20) from dust cap (19). Apply silicone compound to all surfaces of new
gasket. Install gasket in the dust cap (19).
2.
Replace Dust Cap (19). Remove damaged dust cap (19) and chain (21) from male coupling half key ring (22). Pry open
key ring (22), and install dust cap with chain (21) on key ring (22).
3.
Replace Chains (21) and Key Rings (22). Follow steps 5 and 6 in male coupling half replacement procedure.
MALE COUPLING HALF REPLACEMENT (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic Automotive
Sealing Compound (WP 0116, Item 10)
(WP 0113 00, Item 1)
Silicone Compound (WP 0116, Item 12)
Dust Cap (WP 0117, Item 94)
Gasket (WP 0117, Item 96)
1.
Remove dust cap (19) with chain (21) and key rings (22) from damaged male coupling half (18).
2.
Remove damaged male coupling half (18) from pressure control.
3.
Apply coating of sealing compound to threads of male coupling half (18) and install into pressure control.
4.
Apply silicone compound to all surfaces of gasket (20). Install gasket (20) in dust cap.
5.
Pry open key ring (22) and install on male coupling half (18). Install chain (21) on key ring (22).
6.
Pry open second key ring (22) and install on dust cap end of chain (21). Install dust cap (19) on key ring (22).
END OF WORK PACKAGE
0083 00-16
