TM 10-4930-351-14
0083 00
FEMALE COUPLING HALF REPLACEMENT (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanic Automotive
Silicone Compound (WP 0116, Item 12)
(WP 0113 00, Item 1)
Sealing Compound (WP 0116, Item 10)
Dust Plug (WP 0117, Item 95)
Gasket (WP 0117, Item 96)
1.
Remove dust plug (16) with chain and key rings from damaged female coupling half (15).
2.
Remove damaged female coupling half (15) from pressure control.
3.
Apply coating of sealing compound to threads of new female coupling half (15) and install into pressure control.
4.
Apply silicone compound to all surfaces of gasket (17). Install gasket in the female coupling half (15).
5.
Pry open key ring (22) and install on female coupling half (15). Install chain (21) on key ring (22).
6.
Pry open second key ring (22) and install on dust plug end of chain (21). Install dust plug (16) on key ring (22).
MALE COUPLING HALF CLEANING AND INSPECTION (Refer to figure 2.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
None
Wiping Rag (WP 0116 00, Item 21)
1.
Wash male coupling half (18) with a hot water and commercially available soap solution. Dry with a wiping rag.
2.
Inspect male coupling half (18) to determine if cracked, burred, or leaking.
3.
Inspect male coupling half (18) for damaged or missing dust cap (19), chain (21), or key rings (22).
4.
Inspect dust cap for damaged gasket (20).
0083 00-15
