TM 10-4930-351-14
0087 00
ACCESSORY MODULE
Preparation for Storage/Shipment
1.
Open cover and disconnect battery cables at battery. Ensure battery holddowns are securely fastened. (The battery is
a non-spillable, absorbed-electrolyte type and is exempt from hazardous material shipping regulations when secured
in the equipment in which it is used.)
2.
Clean battery terminals and cable connectors with a solution of one-half pound A-A-374 sodium bicarbonate (WP
0116, Item 26) to one gallon of water. Wash battery terminals and cable connectors with clear water and dry
thoroughly.
3.
Wrap cable connectors in paperboard cushioning conforming to A-A-1051 and secure with ASTM-D5330 filament
tape (WP 0116, Item 31).
4.
Ensure all covers are latched.
Care During Storage
WARNING
Do not store lead acid batteries in the same area as nickel-cadmium batteries. The
components of the two battery types will react violently in case of fire or puncture. Each
battery type will be damaged or destroyed if contacted by the electrolyte of the other battery
type. Personal injury or death may result.
Every 3 months:
a.
Clean battery terminals and cable connectors with a solution of one-half pound A-A-374 sodium bicarbonate
(WP 0116, Item 26) to one gallon of water. Wash battery terminals and cable connectors with clear water and
dry thoroughly.
b.
Measure the open-circuit voltage of the battery.
(1) If voltage is 25.3 volts or greater, battery is ready for use.
(2) If voltage is less than 25.3 volts, charge at a constant voltage of 30 volts for about 2 hours.
c.
Wrap cable connectors in paperboard cushioning conforming to A-A-1051 and secure with ASTM-D5330
filament tape (WP 0116, Item 31).
Preparation for Use After Storage/Shipment
1.
Remove cushioning from battery cable connectors.
2.
Clean battery terminals and cable connectors with a solution of one-half pound A-A-374 sodium bicarbonate (WP
0116, Item 26) to one gallon of water. Wash battery terminals and cable connectors with clear water and dry
thoroughly.
3.
Connect battery cables at battery.
4.
Close and latch battery compartment cover.
0087 00-4
