TM 10-4930-351-14
UNIT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
PREPARATION FOR STORAGE OR SHIPMENT
FILTER-SEPARATOR
Preparation for Shipment/Storage
For this assembly, short and long term storage instructions are identical.
NOTE
The filter-separator and all couplings are constructed of aluminum. Preservation is not required.
This procedure assumes the filter-separator has been defueled but may contain some residual fuel
in the sump.
1.
Unwrap drain hose from end cap, extend hose to a shallow container and drain residual fuel. Close the drain valve.
Dispose of drained fuel IAW local SOP. Wrap drain hose around handles on end cap.
2.
Place a drain pan directly beneath the two-inch unisex defueling connection, and uncap and open the defueling
unisex coupling. Allow the filter-separator to ventilate for approximately four hours.
3.
Repeat step 1 to drain any fuel that may have collected from filter element drainage.
Preparation for Use After Shipment/Storage
Not required.
0087 00-1