TM 10-4930-351-14
0086 00
1
5
6
3
7
2
4
INSTALLATION
1.
In the open end of the spring pack assembly (4), rotate the nylon plate fully clockwise. Ensure that all springs are
captured by a pawl.
2.
Align end cap (5) with alignment marks. Verify that latching tabs (6) are exactly aligned with slots in the spring pack.
Carefully press or tap end cap (5) into a fully latched condition. Test with one or two rope pulls to verify shaft rotation.
END OF WORK PACKAGE
0086 00-2
