TM 10-4930-351-14
0100 00
DISASSEMBLY-Continued
WARNING
End cover is under spring pressure. Keep pressure on end cover while removing
screws. Personal injury may occur from sudden separation of end cover.
NOTE
Removing the bonding cable assembly during repair of the CCR nozzle is optional. If
removal is to be done, remove the single screw attaching the assembly to the nozzle
housing.
3.
Remove four corner screws (3) and end cover (4).
4.
Single screw (5) and locking pin (6) should not be removed unless damaged. If damaged, use a soft jaw chuck or vise to
hold locking pin (6) in place and remove screw (5).
17
13
9
13
16
10
11
2
16
13
9
11
17
1
11
15
12
12
11
10
3
13
5
6
8
18
2
4
14
7
PISTON COMPRESSION TOOL
0100 00-2
