TM 10-4930-351-14
0100 00
DISASSEMBLY-Continued
21. While holding the piston compression tool, slowly pull back on the collar (27). Spring (28) will push the piston
compression tool, poppet (29), and sleeve seal (30) out of the nozzle housing (14). Discard sleeve seal.
22. Remove spring (28) and flow guide (31) from coupling end of nozzle housing (14).
23. Place nozzle housing (14) in a soft face vise with coupling end of nozzle facing up. Only tighten the vise enough to
retain the nozzle housing (14).
27
31
28
BODY
WRENCH
30
32
29
COMPRESSION
TOOL
14
CAUTION
Failure to trip the collar latch with the body wrench will cause damage to stayback
detents.
24. Align body wrench with locking lugs (32) and press into coupling end of nozzle until the collar (27) trips to the forward
position.
0100 00-5