TM 10-4930-351-14
DIRECT SUPPORT MAINTENANCE
ADVANCED AVIATION FORWARD AREA REFUELING SYSTEM MODEL M100A1
REPAIR CCR NOZZLE ASSEMBLY
INITIAL SET-UP:
Tools:
Materials/Parts Required:-Continued
Tool Kit, General Mechanic Automotive
Seal, Sleeve (WP 0117 00, Item 13)
(WP 0113 00, Item 1)
Seal, Wiper (WP 0117 00, Item 14)
Chemical and Oil Protective Gloves
Bushing (WP 0117 00, Item 15)
(WP 0113 00, Item 2)
Piston (WP 0117 00, Item 23)
Torque Wrench, 0-300 in. lb.
Nut (WP 0117 00, Item 24)
(WP 0113 00, Item 2)
Ring, Backup (WP 0117 00, Item 25)
Vise (with soft face jaws)
Seal, Teflon (WP 0117 00, Item 26)
(WP 0113 00, Item 3)
Seal (WP 0117 00, Item 31)
Body Wrench
O-Ring (WP 0117 00, Item 110)
Packing, Preformed (WP 0117 00, Item 114)
Piston Compression Tool
Equipment Condition:
Locking Lug Assembly Tool
CCR Nozzle removed from fuel system.
CCR Nozzle Strainer and Coupling Assembly
Poppet Wrench
removed. (Refer to WP 0075 00.)
Materials/Parts Required:
Alcohol, Rubbing (WP 0116 00, Item 2)
Compound, Sealing (WP 0116 00, Item 9)
Compound, Silicone (WP 0116 00, Item 11)
Dry Cleaning Solvent (WP 0116 00, Item 13)
Rags, Wiping (WP 0116 00, Item 21)
DISASSEMBLY
WARNING
Fuels are toxic and flammable. Do not get on person or clothing. Do not use near
open flame. Area should be well-ventilated. Using drycleaning solvents incorrectly
can cause injury or even death. Fuel is flammable. Do not smoke.
Rubber gloves should be worn when handling fueling system components due to the
toxic effects of some fuel additives.
1.
Install piston compression tool in coupling end of nozzle until it latches in place. Do not remove piston compression tool
until directed to do so.
2.
Push in latch actuator (1) and move handle (2) to OPEN position.
0100 00-1
