TM 10-4930-351-14
0100 00
DISASSEMBLY-Continued
WARNING
Body and collar are under spring pressure. Maintain pressure on the body wrench
to prevent sudden separation. Personal injury could result.
25. Turn body wrench and loosen nozzle body (33) from nozzle housing (14).
26. While holding collar spring (34) and collar (27) together, remove collar (27) and spring (34) from nozzle housing (14).
27. Place collar (27), with body wrench still attached, on a workbench with coupling end down.
28. Remove collar spring (34) from collar (27).
29. Remove spring retainer (35) and stayback spring (36) from collar (27).
30. Remove lug retaining ring (37), nine locking lugs (38), three stayback detents (39) and lug wire (40) from body (33).
31. Remove and discard wiper seal (41) from nozzle body (33).
32. Remove and discard backup ring (42) and teflon seal (43) from nozzle body (33).
33. Remove and discard preformed packing (44) from nozzle housing (14).
0100 00-6
