TM 10-4930-351-14
0100 00
ASSEMBLY-Continued
CAUTION
Use the lug assembly tool to tighten the body. Use the body wrench to complete the
tightening process.
16. Push down on nozzle housing (14) and rotate clockwise until tab contacts the collar (27). Rotate housing (14)
counterclockwise until notch and tab are aligned.
17. Remove the assembled components from lug assembly tool and remove tool from vise.
18. Place nozzle housing (14), with coupling end facing up, into a soft jawed vise and tighten only enough to prevent the
housing from turning or falling from vise.
19. Align body wrench with the nine locking lugs (38) and press the body wrench down until the collar (27) trips to the
forward position.
BODY WRENCH
27
14
ALINE NOTCH
AND TAB
0100 00-11
