TM 10-4930-351-14
0108 00
REMOVE CAMSHAFT AND VALVE TAPPETS. (Refer to figure 21.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
None
None
Equipment Condition:
Governor assembly and speed control removed
1.
Remove camshaft (1).
NOTE
Ensure valve tappets are marked for reinstallation. If they are to be reused they should go
back in the same place.
2.
Remove intake and exhaust valve tappets (2) from crankcase. Mark tappets for installation in original location.
1
2
Figure 21. Camshaft and Valve Tappets Removal
0108 00-27