TM 10-4930-351-14
0108 00
REMOVE TIMING (PULLEY END) COVER. (Refer to figure 18.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Key, Socket Head Screw, 6 mm
None
(WP 0113 00, Item 3)
Equipment Condition:
Flywheel and alternator stator removed
1.
Remove crankcase breather hose (1).
2.
Remove the ten socket head cap screws (2) from engine timing cover (3).
3.
Remove timing cover (3) and gasket (4). Discard gasket (4). Remove gasket material residue from crankcase (5) and
timing cover (3).
4.
Remove rear engine oil seal (6) from timing cover. Discard seal (6).
5
1
3
2
4
6
Figure 18. Timing Cover Removal
0108 00-24
