TM 10-4930-351-14
0108 00
REMOVE REAR CRANKSHAFT SUPPORT. (Refer to figure 22.)
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Key, Socket Head Screw, 6 mm
None
Flywheel Puller
Equipment Condition:
Camshaft and tappets removed
Remover, Bearing and Bushing
1.
Remove the ten socket head cap screws (1) from engine rear support (2).
2.
Using flywheel puller and two of the rear support mounting screws, remove engine rear support (2) and O-ring (3).
Discard O-ring (3).
3.
Remove rear engine oil seal (4). Discard seal (4).
4.
Using bushing extractor tool, remove engine rear main bearing (5) from engine rear support. Discard bearing (5).
2
1
4
3
5
Figure 22. Rear Crankshaft Support Removal
0108 00-28