TM 10-4930-351-14
0109 00
INSTALL OIL PUMP (Refer to Figure 12.)
INITIAL SET-UP:
Tools:
Materials/Parts Required
Combination Wrench, 7 mm
O-Ring (WP 0117 00, Item 54)
(WP 0113 00, Item 3)
Key, Socket Head Screw, 4 mm
Equipment Condition:
(WP 0113 00, Item 3)
Crankshaft installed
Torque Wrench, 75 in. lb capacity
(WP 0113 00, Item 3)
1.
Position O-ring (1) in oil pump cover (2).
2.
Insert external oil pump rotor (3) in oil pump cover (2) with bevel facing oil pump cover.
3.
Install internal oil pump rotor (4) on camshaft (5).
4.
Insert oil pump cover (2) with external oil pump rotor (3) over internal oil pump rotor (4) on camshaft (5).
5.
Install three oil pump cover socket head screws (6).
6.
Using a crossing pattern, torque socket head screws (6) to 43-52 in. lbs (5-6 Nm).
5
1
3
4
2
6
Figure 12. Oil Pump Installation
0109 00-16
