TM 10-4930-351-14
0109 00
12. Install hand tight socket head cap screw (29) and washer (30) on back side of shroud (28).
13. Install hand tight two cross tip screws (31) at top/intake side of shroud.
14. Install hand tight socket head cap screws (32, 34 and 36) and washers (33, 35 and 37) attaching shroud.
15. Tighten securely all shroud fasteners.
16. Align oil cooler (8) and shroud (30). Install socket head cap screw (38), lock washer (39) and flat washer (40) attaching
shroud (30) to oil cooler (8).
17. Install lifting eye (41), washer (42) and nut (43) on lifting eye studnut.
18. On fuel feed line, assemble washers (44 and 45) as illustrated on union (46). Use bolt (47) to install assembly on fuel
pump (48).
19. Use screw (49), washer (50) and nut (51) to loosely install clamp (52) on gate (7).
20. Install hand tight new oil filter (53) at filter port (54).
21. Fill engine with 1.9 qts. of 15W-40 lubricating oil.
28
31
34
38
35
39
11
13
12
40
43
42
2
3
41
4
32
33
30
51
67
50
29
5
52
8
49
36
1
17
37
15
16
21
14
19
23
48
20
22
18
10
9
53
47
44
46
54
45
26
27
25
24
Figure 31. Shroud, Gates and Oil Cooler Installation
0109 00-43