TM 10-4930-351-14
0109 00
INSTALL OIL PAN (Refer to Figure 29.)
INITIAL SET-UP:
Tools:
Materials/Parts Required
7/8 in. combination wrench
Gasket, Pan (WP 0117 00, Item 48)
(WP 0113 00, Item 3)
6 mm socket
(WP 0113 00, Item 3)
3/8 in. drive ratchet wrench
(WP 0113 00, Item 3)
10 mm socket
(WP 0113 00, Item 3)
6 mm socket head wrench
(WP 0113 00, Item 3)
Torque Wrench, 50 ft. lb.
(WP 0113 00, Item 3)
1.
Install cap screw (1), washer (2) and net (3).
2.
Position pan gasket (4) on oil pan (5).
3.
Insert and tighten in an alternating pattern the fifteen socket head cap screws (6) and washers (7) attaching oil pan (5) to
the crankcase (8).
4.
Install oil drain plug (9) and washer (10).
5.
Install oil temperature sensor (11). Torque to 22.11-29.48 ft. lbs. (30-40 Nm).
6.
Install dipstick (12).
0109 00-39
