TM 55-2840-231-23
5-2.
Gearbox - Inspection
INITIAL SETUP
Applicable Configuration
References
Paras 5-3, 5-4 and 5-6
ENGINE/
1. Gearbox Housing
Visually inspect the exterior of the gear-
and Cover
box for the following conditions.
Check for cracks in the
gearbox housing and
cover, especially in
stress areas, engine
mounts, accessory pads,
and at the splitline. If
cracks are found, re-
place the engine.
1. Gas Producer Tachometer-
4. Torquemeter Spanner Nut
9. Power Takeoff
Generator
5. Power Turbine Fuel Governor
10. Gas Producer Fuel
2. Power Takeoff
6. Spare (not used)
Control
3. Power Turbine Tachometer
7. Fuel Pump
Generator
8. Starter-Generator
5-2
