TM 55-2840-231-23
5-3.
Gearbox External Seals - Replacement (AVIM) - Continued
GEARBOX/ -
Continued
b. Use -202 detail to
remove seals (2).
c. Use -200 detail to
remove seals (3).
Discard removed seals.
Apply grease (item 37,
Appendix D) to the
seal lip to aid installa-
tion. Carefully drive
the new seal into place
using seal kit as follows:
a. Use- 17 and -14 detail to
install seals (1) at the
fuel pump, space ac-
cessory, fuel control,
and governor pads.
b. Use- 18 and -14 detail to
install seal (1) at the
starter-generator pad.
c. Use- 19 and -15 detail to
install seals (2) at the
power takeoff pad.
d. Use -16 and -13 detail to
install seals (3) at the
tachometer pad.
Reinstall the accessory
or drive on the gearbox
pad.
Change 8
5-5