TM 55-2840-231-23
5-4.
Gearbox External Stud - Replacement
INITIAL SETUP
Applicable Configuration
Consumable Materials
All
Antiseize Compound
GEARBOX/
1. Stud
See following figures for details of thread
size, height and torque.
Oversize replacement studs may be used
when necessary.
2. Stud
Antiseize Compound (item 38, Appendix D).
5-6
(item 38, Appendix D)
Remove and discard
damaged stud.
Clean and retap stud
hole threads only when
condition of hole threads
restrains stud installation.
Use the same size tap.
Apply antiseize com-
pound to the stud
threads and to the stud
hole threads.
Install the stud and
tighten to obtain the
torque and setting
height specified in
preceding figure.