TM 55-2840-231-23
6-13. Preparing Gas Producer Fuel Control For Storage and Shipment - Continued
GAS PRODUCER FUEL
CONTROL/-Continued
Prolonged contact with
lubricating oil (item 4, Appendix
D) may cause a skin rash. Those
areas of skin and clothing that
come in contact with lubricating
oil should be thoroughly washed
immediately. Enclosed areas
where lubricating oil is used
should be adequately ventilated
to keep mist and fumes to a
minimum.
Lubricating Oil (item 4, Appendix D)
b. Drain residual fuel
from fuel control. Place
throttle lever against the
maximum stop. Pump/
pour lubricating oil into
inlet port. When clean oil
flows out of bypass and
fuel outlet ports, remove
the source of oil. Plug the
inlet, bypass and outlet
ports. Reposition the
throttle lever for
shipping.
Change 11
6-25