TM 55-2840-231-23
6-13. Preparing Gas Producer Fuel Control For Storage and Shipment - Continued
GAS PRODUCER
FUEL CONTROL/-
Continnued
NOTE
If the engine fuel system was pre-
served in accordance with paragraph
1-36, step b maybe omitted.
Drycleaning solvent, P-D-680, used
to clean parts is potentially dangerous
to personnel and property. Avoid
repeated and prolonged skin oontact.
Avoid prolonged or repeated
breathing of vapors, Do not use
near open flame or excessive heat.
Flash point of solvent is 100°F -
138°F (38OC - 590C).
Use drycleaning solvent (item 1, Appendix
D).
Use corrosion preventive compound (item
11, Appendix D).
c. Clean exterior of the
fuel control with a clean
cloth dampened with
solvent. Air dry or wipe
with a clean lint-free
cloth. Blow out all
crevices with dry, filtered,
low-pressure compressed
air.
d. Coat external bare
metal surfaces including
the splines with corro-
sion preventive compound.
e. Attach a tag to the
fuel control stating:
FUEL CONTROL
PRESERVED WITH
LUBRICATING OIL,
MIL-L-6081, GRADE
1010.
6-26
