TM 55-2840-231-23
1-32. Installing Engine In Turnover Stand - Continued
LOCATION/lTEM
REMARKS
ACTION
TEST STAND/ -
Turnover Stand Mounting Brackets, Tool No.
Continued
b. Install three turnover
6795579
stand mounting brackets
on the gearbox side
and bottom pads.
c. Lower engine into
the turnover stand.
Insure that the three
mounting brackets
installed on the gear-
box engage the
mounting bosses
on the turnover stand.
d. Slide two clamps at
the gearbox side
mounts in to engage
the mounting brackets
and tighten the hand
knobs.
e. Remove hoist and
lifting tool.
1-39