TM 55-2840-231-23
1-35. Engine - Depreservation.
INITIAL SETUP
Applicable Configuration
All
Consumable Materials
Drycleaning Solvent P-D-680 (item 1, Appendix D)
References
Para 2-11, 2-17 and 5-6
I
LOCATION/ITEM
REMARKS
ACTION
1. Engine
Remove all shipping caps,
plugs, and covers from
engine as required.
2. Engine
Remove lockwire from
fuel control and governor
stops and anti-icing air
valve lever.
Drycleaning solvent, P-D-680, used to
clean parts is potentially dangerous
to personnel and property. Avoid re-
peated and prolonged skin contact.
Avoid prolonged or repeated breathing
of vapors. Do not use near open flame
or excessive heat. Flash point of solvent
is 100° F - 138°F (38°C - 59°C).
3. Engine
4. Engine
Use drycleaning solvent P-D-680 (item 1,
Appendix D).
Refer to paragraphs 2-11, 2-17 and 5-6.
Remove all barrier
material and tape.
Remove tape residue
with solvent.
Remove any corrosion
from the exterior sur-
faces. Touch up paint
as required.
NOTE
Flushing of engine with fuel is not
required.
1-41
