TM 55-2840-231-23
1-30. Engine - Installation Into Reusable Metal Shipping and Storage Container - Continued
LOCATION/lTEM
REMARKS
ACTION
SHIPPING OR STORAGE
Preformed packing (28)
CONTAINER/ - Continued
is removed by removing
four nuts (26), washers
(27), three bolts (33) and
bolt (30).
Do not attempt to stop leaks by over-
torquing nuts. Damage to container
could occur.
4. Engine Records
Receptacle
e. Repeat steps b and c
as required.
f. Wipe off or flush away
soap solution.
g. Install cover (31) on
bolts (30) and tighten
nuts (26) to 15-25
in. lb (0.2-0.3 kg/m).
a. Loosen two nuts (17)
and swing stud as-
sembly (22) out of
the slot in cover
(19). Pivot the cover
out of the way.
b. Insert applicable en-
gine records in envel-
ope (21 ) and place
in the engine records
receptacle.
c. Pivot cover (19) with
gasket (20) into place
over the receptacle
opening and swing
stud assembly (22)
into the cover (19)
slot.
d. Secure the cover in
place by” tightening
two nuts (17) to
30-45 in. lb (0.3-0.5
kg/m).
‘
1-34
